EASY TO USE AND COMPATIBLE EMC D-XTR-DY-A-24 EXAM PRACTICE TEST QUESTIONS FORMATS

Easy to Use and Compatible EMC D-XTR-DY-A-24 Exam Practice Test Questions Formats

Easy to Use and Compatible EMC D-XTR-DY-A-24 Exam Practice Test Questions Formats

Blog Article

Tags: D-XTR-DY-A-24 Reliable Study Questions, Valid Dumps D-XTR-DY-A-24 Free, Exam D-XTR-DY-A-24 Overviews, D-XTR-DY-A-24 Reliable Braindumps Sheet, D-XTR-DY-A-24 Authentic Exam Questions

We know that time is really important to you. So that as long as we receive you email or online questions about our D-XTR-DY-A-24 study materials, then we will give you information as soon as possible. If you do not receive our email from us, you can contact our online customer service right away for we offer 24/7 services on our D-XTR-DY-A-24 learning guide. We will solve your problem immediately and let you have D-XTR-DY-A-24 exam questions in the least time for you to study.

EMC D-XTR-DY-A-24 Exam Syllabus Topics:

TopicDetails
Topic 1
  • XtremIO X1 and X2 Management: In this section of the exam, for storage system managers and administrators, this section of the exam covers storage management operations using GUI, CLI, and REST, including user accounts and access methods.
Topic 2
  • XtremIO X1 and X2 Initial Configuration: For storage system administrators and configuration specialists, this part of the exam covers XtremIO Management Server (XMS) installation options, requirements, and deployment considerations.
Topic 3
  • XtremIO X1 and X2 Solution Integration: For solution architects and integration specialists, this domain covers recoverPoint, VPLEX, and AppSync options, considerations, limitations, and use cases

>> D-XTR-DY-A-24 Reliable Study Questions <<

Valid Dumps D-XTR-DY-A-24 Free | Exam D-XTR-DY-A-24 Overviews

The Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) practice questions are designed by experienced and qualified Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam trainers. They have the expertise, knowledge, and experience to design and maintain the top standard of Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam dumps. So rest assured that with the Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam real questions you can not only ace your Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam dumps preparation but also get deep insight knowledge about EMC D-XTR-DY-A-24 exam topics. So download Dell XtremIO Deploy Achievement (D-XTR-DY-A-24) exam questions now and start this journey.

EMC Dell XtremIO Deploy Achievement Sample Questions (Q55-Q60):

NEW QUESTION # 55
What is a required parameter when initializing a cluster for the first time with the create-cluster command on an XtremIO X2?

  • A. profile
  • B. cluster-psnt
  • C. hw-package
  • D. package

Answer: D

Explanation:
When initializing a cluster for the first time with the create-cluster command on an XtremIO X2, the required parameter is the 'package'. This parameter specifies the software package that will be used to create the cluster. It is essential because it determines the version of the operating system and management software that will be installed on the cluster nodes.
The 'package' parameter is part of the command syntax and must be provided for the command to execute successfully. Without specifying the package, the command would not know which software to install, leading to an incomplete or failed initialization process.


NEW QUESTION # 56
When using the Microsoft VSS Framework with an XtremlO cluster to manage snapshot backups, what is the correct sequence of steps to create a Windows volume backup?

Answer:

Explanation:

Explanation:

The correct sequence of steps to create a Windows volume backup using the Microsoft VSS Framework with an XtremIO cluster is as follows:
* Requestor interacts with the VSS service to start the backup.
* VSS service sends a Freeze request to the Writer.
* Provider creates an XVC of the file system and exposes the volume to the host.
* VSS service sends a Thaw request to the Writer.
* Requestor uses the XVC to back up the content of the volume.
* The Requestor, typically a backup application, initiates the process by interacting with Microsoft's Volume Shadow Copy Service (VSS) to commence a snapshot backup.
* The VSS service then issues a Freeze request to its Writers, which are responsible for ensuring data consistency for applications during backups.
* An XtremIO Provider, which interfaces between the XtremIO storage and VSS, creates an XtremIO Virtual Copy (XVC) of the file system. This copy is then made accessible to the host system for backup purposes.
* After the XVC is created, the VSS sends a Thaw request to the Writers, allowing them to resume normal operations while maintaining data integrity.
* Finally, the Requestor uses the XVC to back up the content of the volume, ensuring a consistent and recoverable backup is made.
Please note that this sequence is based on the standard operation of Microsoft VSS with storage systems like XtremIO and should be verified against the most current Dell XtremIO Deploy Achievement documentation for any updates or specific instructions related to your environment.


NEW QUESTION # 57
In a fully-populated Data Protection Group (DPG) with sufficient capacity, how many disk drives need to fail sequentially to stop the XtremIO X2 data services?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
* Data Protection Group (DPG) in XtremIO X2: The DPG is designed to tolerate multiple disk drive failures while continuing to provide data services.
* Failure Tolerance: In a fully-populated DPG with sufficient capacity, it would require 7 disk drives to fail sequentially to stop the data services, as XtremIO is designed with high fault tolerance and redundancy.
References:
* Dell XtremIO X2 Data Protection Guide
* XtremIO Architecture and Fault Tolerance Documentation
* Dell XtremIO Deployment Services


NEW QUESTION # 58
Refer to the exhibit.

When an XtremIO X2 array is delivered, where is the cable shown in the exhibit connected?

  • A. Middle USB in X3-SC1 and X3-SC2
  • B. Bottom USB in X3-SC1 and X3-SC2
  • C. Bottom USB in X3-SC1 only
  • D. Middle USB in X3-SC1 only

Answer: A

Explanation:
When an XtremIO X2 array is delivered, the cable shown in the exhibit should be connected to the middle USB ports in both X3-SC1 and X3-SC2. This is based on the standard configuration and setup for XtremIO X2 arrays as per the Dell XtremIO Deploy Achievement document. The middle USB ports are typically used for specific functions such as connecting to a management network or interfacing with other devices that are part of the storage array infrastructure.
The process for connecting the cable is as follows:
Identify the Correct Ports: Locate the middle USB ports on both X3-SC1 and X3-SC2. These ports are usually marked and differentiated from other USB ports by their position or labeling.
Connect the Cable: Insert the USB connector end of the cable into the middle USB port on X3-SC1 and then connect the other end to the corresponding port on X3-SC2. Ensure that the connection is secure and that the cable is not obstructing any other components or airflow.
Verify the Connection: Once connected, verify that the cable is recognized by the system. This can typically be done through the XtremIO Management Server (XMS) interface or by checking the system's hardware configuration.
Check for Functionality: Ensure that the connected cable functions as intended. This may involve transferring data or accessing the management network, depending on the specific use case for the cable.
Reference Official Documentation: For detailed instructions and best practices, always refer to the official Dell XtremIO Deploy Achievement document1. This document provides comprehensive guidance on all aspects of setting up and managing XtremIO X2 arrays, including cable connections.
By following these steps and referring to the official documentation, you can ensure that the cable is connected correctly and that the XtremIO X2 array is set up for optimal performance and management.


NEW QUESTION # 59
A company's storage administration team wants to receive e-mail notifications when the XtremlO cluster detects an issue of major severity. The administration team has successfully configured and tested the e-mail server in the XtremlO web interface. However, the e-mail server is not receiving the expected notifications when major severity issues appear.
What is the cause of this issue?

  • A. Event handlers have not been defined
  • B. Alert definitions have not been defined
  • C. ESRS must also be configured
  • D. Private reports have not been defined

Answer: B

Explanation:
In XtremIO, configuring email notifications involves several steps, including setting up the email server and defining alert definitions. While the email server may be correctly configured and tested, notifications will not be sent unless the alert definitions are also set up. Alert definitions specify the conditions under which notifications are sent, including the severity level of issues. If major severity alerts are not defined, the email server will not trigger notifications for those events.
References:
* Dell XtremIO Deployment and Learning Course Materials


NEW QUESTION # 60
......

Our Dell XtremIO Deploy Achievement test torrent boost 99% passing rate and high hit rate so you can have a high probability to pass the exam. Our D-XTR-DY-A-24 study torrent is compiled by experts and approved by the experienced professionals and the questions and answers are chosen elaborately according to the syllabus and the latest development conditions in the theory and the practice and based on the real exam. The questions and answers of our D-XTR-DY-A-24 Study Tool have simplified the important information and seized the focus and are updated frequently by experts to follow the popular trend in the industry. Because of these wonderful merits the client can pass the exam successfully with high probability.

Valid Dumps D-XTR-DY-A-24 Free: https://www.exams4collection.com/D-XTR-DY-A-24-latest-braindumps.html

Report this page